Other Connectors Configuration; 2-10.1 On Board Fan Connectors - SOLTEK 85MR3-R Manual

85MR3-R / 85MR3-RL

2-10 Other Connectors Configuration

This section lists out all connectors configurations for users' reference.

2-10.1 On Board Fan Connectors

1
Jp1
PS/2 Mouse
(on top)
PS/2 K/B (underside)
RJ45
(on top)
USB0 (middle)
USB1 (underside)
2 1
4 3
LED2
Jp10
Jp11
1
RTL8100B
RTL
AC'97
ALC650
Codec
1
CD1
IT8712F
LPC I/O
Audio1
14
COM3
1 CN19
1
1
Both Sensor and No-sensor Fan Connectors support CPU/AGP/Sys-
tem/Case cooling fan with +12V mode. When connecting the wire to
any Fan Connector, users should make sure that the red wire is for the
positive current and should be connected to pin +12V, and the black
wire is Ground and should be connected to pin GND.
A Hardware Monitor chipset is on board, with which users can install
a Hardware Monitor Utility and read the fan speed transmitted from the
sensor fan. Otherwise, users can read the fan speed from the "Hard-
ware Monitor Status" in CMOS BIOS.
A running Fan will send out 2 electric pulses per rotation of its fan
blade. A Sensor Fan Connector will count the electric pulses and send
the information to the System Hardware Monitor which in turn will work
out the fan rotation speed and display it with the monitoring program.
Fan1
1
RT2
LED1
1
Intel
Clock
Generator
i845GE
AGP 4X
PCI 1
PCI 2
Intel
ICH4
PCI 3
ATA2
JBAT1
PCI 4
1
PDC
20376
PCI 5
1
BIOS
JP15
PCI 6 ATA1
CN20 CN21
Fan3
1 1
Sensor
+12V
GND
Sensor Conn.
Fan Connector
Fan1, yellow, sensor
Fan Connector
Fan2, yellow, sensor
Jp14
Fan Connector
Fan3, yellow, sensor
34
Void
+12V
GND
No Sensor