SOLTEK 85MR3-R Manual page 72

Memory Hole Allows you to enabled / disabled (default) the sup-
(Hyper-Threading
Function)
Internal Graphics
Mode Select
AGP Aperture Size Allows you to set the AGP Aperture Size.
USB Controller Allows you to set the USB Controller on the USB
USB 1.1 Device Legacy
Support
USB 1.1 Port 64/60
Emulation
Boot display Device Allows you to select the Boot isplay device.
Flat Panel Type Allows you to select the flat panel type.
TV Standard Allows you to select the TV standard.
Flat Panel Scaling Allows you to select the mode for flat panel scaling.
port of Memory Hole which is reserved for ISA card.
If Hyper-Threading CPU is running on board, this
item appears to show the enabled status.
Choices: Enabled; Disabled
Allows you to set the internal graphic mode.
Choices: 512KB; 1MB; 8MB; Disabled
Choices: 4MB; 8MB; 16MB; 32MB; 64MB; 128MB;
256MB;
port(s).
Choices: 6 USB Ports; 4 USB Ports;
2 USB Ports; Disabled
Allows you to select the USB Device Legacy support.
Choices: No Mice; All Device; Disabled
Allows you to enable/disable (default) the Port 64/
60 Emulation.
Choices: Auto; CRT; TV; EFP; CRT+EFP
Choices: 640x480LVDS;800x600LVDS;
1024x768LVDS; 1280x1024LVDS;
1400x1050LVDS;1600x1200LVDS;
640x480CMOS; 800x600CMOS;
1024x768CMOS; 1280x1024CMOS;
1400x1050CMOS; 1600x1200CMOS
Choices: Auto (default); NTSC(M / M_J / 433 / N);
PAL(B / G / D / H / I / M / N / 60);
SECAM(L / L1 / B / D / G / H / K / K1 /)
Choices: Auto (default); Force Scaling; Disabled
77
Chapter 4 BIOS Setup