2-7.5 Jp3: Anti-Burn Shield (Absii); 2-7.6 Jkb1: Ps/2 Kb/Mouse Power On/Wake Up - SOLTEK B7A-F User Manual

2-7.5 Jp3: Anti-burn Shield (ABSII)

Jp3 is designed to enable the over-
heat safeguard for some CPUs which
are incorporated with a protective
thermal diode. The latest AMD Athlon
XP and Duron Morgan CPUs are in-
corporated with such thermal diode
and can be protected by this function.
Setting Jp3 1-2 closed (default
setting) will get system shutdown
when the above-mentioned CPUs get
o
t o 8 5 C ( t h e d e f a u l t p r o t e c t i o n
temperature.) Only when the CPU re-
turns to a cooler state can you restart
your system.
For other CPUs that are not incorporated with a protective thermal diode,
please set Jp3 2-3 closed to disable the function because it is a vain
design now.
Reminder: If a sudden shutdown happens to your system which has
been running well for a while with an AMD Athlon XP/ Duron Morgan
CPU, this might be caused by the "Overheated CPU Shutdown" design.
Please use a better CPU cooling fan and restart your system.

2-7.6 JKB1: PS/2 KB/Mouse Power On/Wake Up

JKB1 is designed on board as a
jumper to enable/disable the PS/2
keyboard/mouse Power On/Wake Up
function. Yet users should still enter
BIOS setup to choose the Wake Up/
Power On mode.
Chapter 2 Hardware Setup
Jp3:
Anti-burn Shield (ABSII)
(Overheated CPU Shutdown)
(only for Athlon XP/
Duron Morgan)
1-2 closed (default)
To enable overheated CPU
1
o
(85 C) shutdown function
2-3 closed
To disable overheated
1
CPU shutdown function
JKB1:
PS/2 KB/Mouse Power On/Wake
Up
1
1-2 closed
PS/2 KB/Mouse Power On
/ Wake Up Disabled
2-3 closed
1
PS/2 KB/Mouse Power
On / Wake Up Enabled
29
(default)