GE MAC 1600 Operator's Manual page 95

2028451-182B
NOTE
Physicians must be added in User Setup before they can be picked as
default physicians. For more information, refer to
page 9-27.
For more information on the ERGO and CFRA options, refer to
"Options Setup" on page 9-29.
To reach the Basic Setup from the MAC 1600 Main Menu, press F5
(System Configuration) > F1 (Basic Setup).
The following table describes each setting available on Basic Setup.
Field
Page 1
Name
Street
City
Ordering Physician
Referring Physician
Attending Physician
Technician
Location
Site #
Cart #
Test Patient (temporary)
MAC™ 1600
Comment
The name of the institution.
The street address of the institution.
The city where the institution is located.
The physician who ordered the ECG. Defaults on any
patient records created on the device.
The physician who referred the patient. Defaults on any
patient records created on the device.
The physician who supervised the ECG. Defaults on any
patient records created on the device.
The technician who conducted the ECG. Defaults on any
patient records created on the device.
Location ID where the device is located. Defaults on any
patient records created on the device.
Site number where the device is located. Defaults on any
patient records created on the device.
Required to store ECG reports on a cardiology information
system, such as the MUSE™ system.
Unique cart number of the device. Defaults on any patient
records created on the device.
Enables/disables simulated ECGs. When enabled,
simulated waveforms are generated in the resting,
arrhythmia, or stress ECG functions. This is useful for
demonstration, training, or testing purposes.
NOTE
This setting clears when the unit is reset.
System Configuration
"User Setup" on
9-3