GE MAC 1600 Operator's Manual page 112

System Configuration
9-20
Field
Export XML
Serial Baud Rate
Allow Export Using Shared
Directory
Share Name
Username
Password
Confirm
Domain
Page 2
Location
MAC™ 1600
Comment
Determines whether ECG records will be transmitted as
XML. If set, ECG records exported to SD card will be
stored in both XML and Hilltop formats. If not set, ECG
records exported to SD card will be stored only in Hilltop
Determines the speed at which data will be transmitted
across the serial communications port.
Determines whether ECG records can be exported to a
shared network drive. Available only if the LAN
Communications to CardioSoft option (LANC) has been
activated.
If this field is checked, the following five fields become
available.
Identifies the name of the shared network drive. It must be
the share's name; IP addresses are not supported.
Maximum of 256 characters.
Available only if the Allow Export Using Shared Directory
field is checked.
Identifies the user name that the MAC 1600 system will
use to log on to the shared directory. The user must be set
up on the domain with the appropriate permissions to
access the shared directory. Maximum of 30 characters.
Available only if the Allow Export Using Shared Directory
field is checked.
Identifies the password that the MAC 1600 system will use
to log on to the shared directory. Maximum of 30
characters.
Available only if the Allow Export Using Shared Directory
field is checked.
Re-enter the password in this field to confirm that the
password was typed correctly.
Available only if the Allow Export Using Shared Directory
field is checked.
Identifies the user's domain. Maximum of 30 characters.
Available only if the Allow Export Using Shared Directory
field is checked.
Identifies the name of a communication location that will
receive the transmission from the MAC 1600 system. Up to
four locations can be defined.
2028451-182B