Paper Jams; Sd Card Not Present - GE MAC 1600 Operator's Manual

Paper Jams

SD Card Not Present

2028451-182B
Verify the selected device is supported.
For a list of supported devices, refer to
(Stress Option)" on page 2-10.
Verify the device is connected to the MAC 1600 unit.
External stress devices connect to the MAC 1600 unit via a serial
cable. For more information, refer to
Verify the protocol is set up to activate the device.
The protocol can be set up to set the device's speed and grade or load.
For more information, refer to
page 9-16.
Verify the Stop TM button is not depressed.
For more information, refer to
If the paper jams while printing, do the following:
Verify the paper was inserted correctly.
For details, refer to
Verify the paper tray spacers are set appropriately for the paper size.
For details, refer to
page 10-9.
If you receive an error message stating that the SD card is not present or
cannot be found, do the following:
Verify an SD card is inserted into the card slot on the back of unit.
For details, refer to
Verify the SD card is seated firmly.
The SD card will click into place when seated firmly.
Verify the SD card is formatted for a FAT or FAT16 file system.
To verify an SD card is formatted for the correct file system, do the
following:
1. Insert the card into an SD card reader attached to a PC.
2. Copy any files you want to save from the SD card to a folder on
the PC.
3. Using the Windows Format command, specify either FAT or
FAT16 for the file system and format the card.
NOTE
Formatting the SD card will erase any existing files on the
card.
4. Copy the files from the folder on the PC to the newly formatted
SD card.
MAC™ 1600
"Connecting External Devices
"Back View"
"Editing Stress Protocols"
"Stress Test Keys"
"Replacing Paper" on page 10-8.
"Adjusting the Paper Tray for Paper Size"
"Back View" on page 2-3.
Troubleshooting
on page 2-3.
on
on page 7-5.
on
A-5