In120 /In220 Installation Instructions - Assa Abloy Corbin Russwin ED5200N Series Installation Instructions Manual

IN120 & IN220 Series
ED5200N / ED5600N Series
Exit Devices for 9100/9M100
9

IN120 /IN220 Installation Instructions

1 Install Outside Reader
a. Orient the reader so the LED lens is at the top.
b. Feed the reader harness through the door (from outside to inside).
c. Install the reader to the outside of door by aligning the mounting posts with the door
preparation holes. Hold the reader flush against door while ensuring proper alignment.
Keypad/Reader
Copyright © 2016, 2019, 2021, ASSA ABLOY Access and Egress Hardware Group, Inc.
All rights reserved. Reproduction in whole or in part without the express written
permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
Outside Face of Door
LED
Assembly with
Harness
Fig. 15a
23