Assa Abloy Corbin Russwin ED5200N Series Installation Instructions Manual page 27

IN120 & IN220 Series
ED5200N / ED5600N Series
Exit Devices for 9100/9M100
9 IN120 /IN220 Installation Instructions (Continued)
3 Installing the Controller (Continued)
1. Insert bottom tab of controller (ensure a clear path) into slot on mounting plate (Fig. 17d, e).
2. Ensure proper alignment of board-to-board connectors (Fig. 17e) while pivoting controller toward door
until two tabs on top click securely into place on mounting plate (Fig. 17d).
CAUTION: To avoid possible damage to board-to-board connectors, care should be taken when securing controller
Copyright © 2016, 2019, 2021, ASSA ABLOY Access and Egress Hardware Group, Inc.
All rights reserved. Reproduction in whole or in part without the express written
permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
to mounting plate. If there is resistance when securing, detach controller to determine cause before
re-attaching controller.
Fig. 17d
27
Click
into
place
Fig. 17e