Assa Abloy Corbin Russwin ED5200N Series Installation Instructions Manual page 20

8 Mortise Exit Installation Instructions (Continued)
5 Install Exit Device
a. Seat device against door being careful to align transfer bar with retractor in lock body
- see Figure 12a.
b. Fasten device to trim assembly using (2) 1/4-20 pan head screws (Fig. 12a).
c. Follow instructions packed with device to secure device to door.
d. Tighten all (4) screws (Fig. 12b).
Fig. 12a
Inside Face of Door
Door Position
Switch
Fig. 12b
20
Copyright © 2016, 2019, 2021, ASSA ABLOY Access and Egress Hardware Group, Inc.
All rights reserved. Reproduction in whole or in part without the express written permission
of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
IN120 & IN220 Series
ED5200N / ED5600N Series
Exit Devices for 9100/9M100
Tighten
securely