General Information - Boser HS-6300 Manual

Chapter-1

General Information

The HS-6300 is a PICMG Bus Dual Pentium
Card with features combine together to make it as an ideal add-in-one industrial
single board computer, enhanced I/O effects and VGA interface and Intel
82558B LAN.
With on board DMA33 of mode 4 to IDE drive interface architecture, the HS-6300
supports with maximum 33.3MB/sec in data transfer rating to 4 pieces IDE drive
connection. Design with Intel
1024 x 768 6535 colors display resolution.
The advanced PICMG Bus add-on connection of HS-6300 allows user could
easily obtain both ISA's 16bit and PCI's 32bit full set signals from a full size
operating. The HS-6300 provides with four pieces 168pin DIMM sockets that
supports up to 2GB of main system memory.
A single Flash chip holds the system BIOS, and you can change the Flash BIOS
by the Utility Update. Advanced USB and IR ports also provide for faster and
easily in data transmission. You can also use the DOS version of the
TM
DiskOnChip socket by issuing commands from the DOS prompt without the
necessity of other software supports up to 144MB.
If a non-expect program cause halts, the on board Watch-Dog Timer will
automatically reset the CPU or generate an interrupt. The Watch-Dog is designed
with hardware only and doesn't need any arithmetical functions of a real-time
clock chip. This ensures the reliability in an unmanned or standalone system.
4
®
II/III Industrial Single Board CPU
®
82443BX core logic VGA chipset supports up to
®