Table of Contents
Advertisement
3.14 Fast Ethernet Connector
The Fast Ethernet controller provides with 32bit performance, PCI Bus
master capability, and full compliance with IEEE 802.3 10/100 Based-T
specifications.
For 10/100 Base-T operation, please connect the network connection by
plugging one end of the cable into the 9-pin RF-45 CN16 connector.
CN16 : Ethernet Connector ( 9-pin RJ-45)
PIN NO.
DESCRIPTION
1
TX+
3
RX+
5
NC
7
NC
9
Ground
For indication out the LAN operating status, the board provides three LED
indicators in show out the status at follows：
LE1：LED indicator lighting shows 10 Based data rating
LE2：LED indicator lighting shows 100 Based data rating
LE4：LED indicator lighting shows LAN in active
JP15 : LAN Enable/Disable
OFF
ON
30
PIN NO.
DESCRIPTION
2
TX-
4
NC
6
RX-
8
NC
Enable
Disable
Advertisement
Table of Contents
