Caution Of Static Electricity - Boser HS-6300 Manual

Chapter-2
Hardware Installation
This chapter provides the information on how to install the hardware of
HS-6300. At first, please follow up sections 1.3, 2.1 and 2.2 in check the
delivery package and carefully unpacking. Following after, the jumpers
setting of switch, Watch-Dog Timer and the DiskOnChip
selection etc.

2.1 Caution of Static Electricity

The HS-6300 has been well package with an anti-static bag in protect its
sensitive computer components and circuitry from the damage of static
electric discharge.
Note：DO NOT TOUCH THE BOARD OR ANY OTHER SENSITIVE
COMPONENTS WITHOUT ALL NECESSARY ANTI-STATIC
PROTECTION.
You should follow the steps as following to protect the board in against
the static electric discharge whenever you handle the board：
1. Please use a grounding wrist strap on whoever needs to handle the
HS-6300. Well clip the ALLIGATOR clip of the strap to the end of
shielded wire lead from a grounded object. Please put on and
connect the strap before handle the HS-6300 for harmlessly
discharge any static electricity through the strap.
2. Please use anti-static pad for put any components or parts or tools
on the pad whenever you work on them outside the computer. You
may also in use the anti-static bag instead the pad. Please ask from
your local supplier in help up your necessary parts on anti-static
requirement.
TM
address
9