Caution On Unpacking And 2.3 Hs-6300' S Layout - Boser HS-6300 Manual

2.2 Caution on Unpacking and Before Installation
First of all, please follow with all necessary steps of section 2.1 in
protection the HS-6300 from electricity discharge. With refer to section
1.3, please check the delivery package again with following steps：
1. Unpacking the HS-6300, keep well storage of all packing material,
manual and diskette etc.
2. Is there any components lose or drop from the board？ DO NOT
INSTALL IF IT HAPPENED.
3. Is there any visual damaged of the board？ DO NOT INSTALL IF
HAPPENED.
4. Well check from your optional parts (i.e. CPU, SRAM, DRAM,
ROM-Disk etc.) for completed setting all necessary jumpers setting
to jumper pin-set and CMOS setup correctly. Please also reference
to all information of jumpers setting in this manual.
5. Well check from your external devices (i.e. Add-On-Card, Driver
Type etc.) for completed add-in or connection and CMOS setup
correctly. Please also reference to all information of connector
connection in this manual.
6. Please keep all necessary manual and diskette in a good condition
for your necessary re-installation if you change your Operating
System or whatever needs.
10