Jumper Setting Description - Boser HS-6300 Manual

Table of Contents

2.6 Jumper Setting Description

A jumper pin-set is ON as a shorted circuit with a plastic cap inserted

over two pins. A jumper pin-set is OFF as a open circuit with a plastic cap

inserted over one or no pin between pins. The below figure 2.2 shows the

examples of different jumper pin-set setting as ON or OFF in this

manual.

Figure 2.2

All jumper pin-set already has its default setting with the plastic cap

inserted as ON, or without the plastic cap inserted as OFF. The default

setting may reference in this manual with a "*" symbol in front of the

selected item.

Table of Contents

Hs-6300v