Updating Cintech Dial-By-Name - Nortel Voice Mail Software Manual

Updating Cintech Dial-by-Name

The methods used to upgrade the system software may cause Dial-by-Name (DBN)
to fail to load after the system is rebooted. To resolve this problem, follow the steps
below. All customer data associated with DBN will be retained, including phone
books, phone book entries, and so on.
NEXT
P0994576 Issue 01
1. Place the original DBN floppy diskette in the NAM's
floppy disk drive.
2. Press Ä á Ú Þ .
3. Enter the default password ÛÛÛÜààÛ
(ACCESS2).
4. Press
ADMIN
5. Press until the display shows:
6. Press
SHOW
7. Press
INSTL
When the installation is complete, the display will
show:
8. Remove the DBN floppy diskette from the NAM's
floppy disk drive.
9. Press Ä á ß â .
10. If this display does not appear, contact your technical
support representative for further instructions.
11. Press ¨ to end this programing session.
Norstar Voice Mail 4.1 Software Upgrade 23
.
.
. The system will start loading DBN.
Norstar Voice Mail 4.1 Software Upgrade Guide