Nortel Voice Mail Software Manual page 39

P0994576 Issue 01
Upgrading a Norstar Voice Mail system with a 270 MB hard disk drive 39
8. Reboot the system from a Norstar telephone. For
more information, refer to
page 40.
9. While the system is rebooting, the monitor will go
blank. Watch the screen during the reboot. When a
small white OS/2 box appears in the top left corner,
you must immediately press ºAlt
Œ
F1
at the same time. The flashing white box only
appears on the screen for 2 seconds.
Note: If you were unable to press ºAlt
Œ
F1
the power to the NAM and repeat step 9.
10. When the Recovery Choices screen appears on the
monitor, press × on the keyboard.
11. The monitor, keyboard and mouse are initialized and
enabled.
Note: Steps 9 and 10 are part of a first time monitor
initialization process. If the monitor,
keyboard and mouse are removed from the
NAM, only steps 1 through 8 need to be
performed to re-enable the monitor package.
"Rebooting the NAM"
while the white OS/2 box appeared, cycle
Norstar Voice Mail 4.1 Software Upgrade Guide
on
and
and