Introduction; Features - AND GX-M Series Instruction Manual

This manual describes how the GX-M/GF-M series balance works and how to get the most out of it in
terms of performance. Read this manual thoroughly before using the balance and keep it at hand for
future reference.
Depending on the software version of your balance, there are cases that behave differently.
For confirmation of the software version of the balance, refer to "27. How To Check The Software
Version Of The Balance".

1-1 Features

□
The balance has a self-check function that inspects the balance itself using electronically
controlled load (ECL) and evaluates performance. Read this manual thoroughly before using the
balance and keep it at hand for future reference.
□
The balance can detect impact applied to its mass sensor and display the level of that impact.
ISD (Impact Shock Detection).
□
Continuous change of the balance can be calculated as flow rate, displayed and output. FRD :( Flow
Rate Display).
□
The balance is equipped with a data memory function, which can record weighing value,
calibration result, and multiple unit mass (mass per sample in counting mode) (Up to 200 items
are stored for weighing value).
□
The GX-M series has automatic self calibration using the internal mass, adapting to temperature
changes, setting time and interval time.
□
Good laboratory practice (GLP) / Good manufacturing practice (GMP) data can be output using
the RS-232C serial interface.
□
A built-in clock and calendar that can add the time and date to the output data.
(Setting changes due to the clock can be limited only for an administrator. (Password Lock
Function))
□
Comparator Indicators, displaying the comparison results with
the setting, 5-step comparison is also possible.)
□
Capacity Indicator, displaying the weight value in percentage relative to the weighing capacity.
□ Hold Function, provided for weighing a moving object such as an animal.
□ Underhook, for measuring density and weighing magnetic materials.
□ Password lock function can limit users for the balance to be used or changes due to the function
settings by setting a password.
□ Key lock function allows the balance to only operate using commands from an external equipment
by disabling key operations on the balance.
□ The balance is equipped with an RS-232C serial interface and a USB interface to communicate
with a computer. Windows computer using the Windows communication tools software (WinCT)
make building a system very easy. The latest Win-CT software can be downloaded from the A&D
website.
Windows is the registered trademark of the Microsoft Corporation.
□
A breeze break is included with the model featuring a minimum display of 0.01g.

1. Introduction

6
LO .(Depending on
HI OK