To Change The Alarm3 And Its Hysteresis Values (Deviation Alarm) - Thermo Scientific STF55433 Installation And Operating Manual

| Main Controller: 25x500 Segment Programmable
Chapter 7
|
7-68 305435H03
To Change the ALARM3 and its HYSTERESIS
values (Deviation Alarm)
1. Press PAGE until following image is shows on the display.
2. Press SCROLL to select Alarm3 Threshold value.
3. Press raise/lower buttons to change Alarm3 Deviation value, the controller will accept
the new value which is indicated by a brief flash of the display.
4. Press SCROLL button to select Alarm3 Hysteresis value.
1500°C Tube Furnace