Table of Contents
Advertisement
1500°C Tube Furnace
5. To change the ALARM HYSTERSIS
Press the SCROLL
or DOWN
button for the desired HYSTERSIS value is displayed and then
release the button. A few seconds after the button is released, the controller will
accept the new value and is indicated by a brief flash of the display.
Press
PAGE
button
6. To get the Peak High Temperature reading
Press SCROLL
button until "HIGH" shows on the controller display.
(example: below image shows maximum achieved temperature since the unit
powered up)
Operation - 3216i Over Temperature Controller |
button until "A1.HYS" is displayed, then press the UP
to return to HOME display.
Chapter 8
305435H03 | 8-75
Advertisement
Table of Contents
