1500°C Tube Furnace
Beacon
Description
PROG
To select the program summary page.
RUN / HOLD
Press once to start a program. 'RUN' will be indicated.
Press again to hold a program. 'HLD' will be indicated.
Press and hold for at least two seconds to reset a program.
'RUN' will flash at the end of a program.
'HLD' will flash during holdback.
The Operator Buttons
Shortcut Key Presses
Action
Backpage
Backscroll
Main Controller: 25x500 Segment Programmable |
Press to select a new list of parameters and from any
display - press PAGE to return to the HOME Page
Press to select new parameter from the page header. If held
down it will continuously scroll through parameters.
Press to decrease or change the state of a value.
Press to increase or change the state of a value.
Key Presses
Press
followed by
continue to press
to scroll page headers backwards.
(With
still pressed you can press
forward. This action is the same as pressing
When in a list parameters, press
held down continue to press
backwards.
(With
still pressed you can press
forward. This action is the same as pressing
Chapter 7
. With
held down
to page
alone).
followed by
. With
to scroll parameters
to page
alone).
305435H03 | 7-47