Installation and Operation
3.3
Adjustment of roller unit (kerbstone)
The working height of the device (TAS-UNI) can be
adjusted with the spindle (1).
•
Place the roller unit on the kerbstone.
•
Release the eyebolt (2).
•
Adjust the screeding profile on the crank (1) in that way,
that the screeding profile rests on the facing bedding
sand. Orientaion on the scale (3).
➔TIPP Optimal facing bedding sand (grit height) 2-3
cm.
•
Fasten eyebolt (2) again.
51000042/51000043
Roller unit
Kerbstone
Facing bedding sand
11 / 16
(1)
(2)
(3)
Fig. 2
GB