Machine Pulling - probst TAS-UNI-450 Operating Instructions Manual

Operation
4.1.2

Machine Pulling

Fit 2 pulling chains into eyebolt (2) to pull the device by
machine. Fasten the ends of the pulling chains on the wheel
loader/excavator (near hooh-in-system of shovel)
Step board (3) above the roller unit increase the pressure to
the ground (Operator can place a foot on it).
Check before each working with shovels, if the
handle of the shovel is fastened - danger of
accident.
51000042/51000043
Fig. 6
(2)
14 / 16
(3)
GB