probst TAS-UNI-450 Operating Instructions Manual page 35

Installation and Operation
Figure 7
(2)
Measure the outer dimension at the TAS-DP (1) with a qualified measuring tool (6) e.g. yard stick (or slide gauge).
These measure must be equal at the front side and back side (see ).
→ Figure 10 and Figure 11.
Tighten both nuts again (tight) on the inner side at the TAS-DP. → Figure 12
Figure 10
1%
Also a pan profile with different lengths of
aluminium profiles is preparable.
→ see Figure B1
51000042/51000043
(2)
Figure 11
(1)
(6)
Figure B (pan profil)
Remessure the actual slope
facing bedding sand
at the
Figure 8
(3)
(3)
(6)
Referenz plane
Figure B1
10 / 16
Figure 9
(5)
Figure 12
1%
(4)
1 %
GB