Replaceable Parts - Agilent Technologies 8494G Operating And Service Manual

CAUTION

Replaceable Parts

Table 5 lists the replaceable parts which are the only parts that can be
replaced without access to the interior of the instrument. If any parts not
listed below need replacement, return the instrument to Agilent
Technologies.
To order a part listed in the replaceable parts table below, quote the part
number, indicate the quantity required, and address the order to the nearest
Agilent Technologies office.
Due to special fixtures necessary for assembly, do not attempt to replace any
parts not listed in the table below. If the instrument is opened, the warranty is
void.
Table 5 Replaceable Parts
Description
Option 003 7-mm center conductor contact
Option 003 7-mm connector outer shell assembly
Option 001 type-N female connector outer shell
Screws for both bases: 4-40 x 7/8 in. Fillister head
Cable, solenoid drive, 1.52 m (5 ft) long, connector plug on
one end and other end unterminated
Base for 8495G/H
Base for 8494G/H and 8496G/H
Connector plug and contacts only without cable
Contact insertion/extraction tool
1. Available from distributors of Viking Industries, Inc., Chatsworth CA 91311
Part Number
1250-0907
1250-0909
1250-0914
2220-0006
8120-2178
5041-3887
5041-3888
TKP12-12-102P-TS-100-AU
1
TIE-200
8494/95/96G/H Operating And Service Manual 15
Replaceable Parts
1