Table of Contents
Advertisement
Assembling the Handle
No Parts Required
1. Attach the lower handle to the mower housing with 4 bolts, 4 flat washers, 4 split washers, and 4 nuts
Figure 5).
2. Attach the upper handle to the lower handle using 2 handle bolts, 2 curved washers, and 2 bolts. Tighten
the handle bolts securely by hand. Figure 6.
Figure 5
1.
Bolt (4)
2.
Flat washer (4)
Figure 6
1.
Handle bolt (2)
2.
Curved washer (2)
3.
Bolt (2)
14
3.
Split washer (4)
4.
Nut (4)
4.
Upper handle
5.
Lower handle
EN
Advertisement
Table of Contents
