Operation; Before Operation; Inserting The Electric-Start Button; Installing The Battery Pack - Hayter CODE613A Operator's Manual

Operation

Note: Determine the left and right sides of the machine from the normal operating position.

Before Operation

Inserting the Electric-Start Button

Remove the electric-start button from the plastic parts bag and insert it into the electric starter. Figure 10.

Installing the Battery Pack

Important: Operate the battery pack only in temperatures that are within the appropriate range; refer to
Specifications.
1. Make sure that the vents on the battery are clear of any dust and debris.
2. Lift up the battery compartment lid. Figure 11A.
3. Line up the cavity in the battery pack with the tongue on the machine and slide the battery pack into
the compartment until it locks into place. Figure 11B.
4. Close the battery compartment lid. Figure 11C.
Note: If the battery-compartment lid does not close completely, the battery is not fully installed.
1
2
Figure 10
1. Electric-start button
2. Electric starter
A B
Figure 11
17
C
EN