Table of Contents
Advertisement
After Operation
Charging the Battery Pack
Important: The battery pack is not fully charged when you purchase it. Before using the tool for the first
time, place the battery pack in the charger and charge it until the LED display indicates the battery pack
is fully charged. Read all safety precautions.
Important: Charge the battery pack only in temperatures that are within the appropriate range; refer to
Specifications.
Note: At any time, press the battery-charge-indicator button on the battery pack to display the current
charge (LED indicators).
1. Make sure that the vents on the battery are clear of any dust and debris.
2. Line up the cavity in the battery pack with the tongue on the charger. Figure 20.
3. Slide the battery pack into the charger until it is fully seated. Figure 20.
4. Slide the battery backward out of the charger.
2
1
3
Figure 20
1.
Battery pack cavity
2.
Battery pack venting
areas
3.
Battery pack terminals
4.
Battery-charge-
indicator button
6
5
4
5.
LED indicators (current
charge)
6.
Handle
7.
Charger LED indicator
light
8.
Charger venting areas
24
7
8
EN
Advertisement
Table of Contents
