Installing The Grass Bag; Removing The Grass Bag; Rear-Discharging The Grass Clippings; Shutting Off The Machine - Hayter CODE613A Operator's Manual

Installing the Grass Bag

1. Raise and hold up the rear deflector. Figure 16A.
A
B
B
Figure 16
2. Install the grass bag, ensuring that the pins on the bag rest in the notches on the handle (Figure 16B).
3. Lower the rear deflector.

Removing the Grass Bag

1. To remove the bag, reverse the steps in Installing the Grass Bag.

Rear-Discharging the Grass Clippings

1. If the grass bag is on the machine, remove it before rear-discharging the clippings.

Shutting off the Machine

1. Release the blade-control bar. Figure 17A.
2. Remove the electric-start button from the electric starter. Figure 17B.
3. Remove the battery pack.
Note: Whenever you are not using the machine, remove the electric-start button and battery pack.
A B
Figure 17
EN
21