June 2005
Configuring the IP addresses
To configure the IP addresses:
1
Complete the fields as described in "IP Configuration field descriptions" on
page 182.
2
Click on the OK button.
Result: Configuration Manager writes the changes to a temporary file on
the administration PC.
3
Click on the Send button to update the RLC with the new information.
Notes:
a. When you change IP configuration parameters and Save to Flash, calls
b. To save changes to Flash memory, select Upload
RLC Installation and Administration Guide
can be dropped. Ensure that there are no active calls when you make
changes to these parameters.
from the Menu Bar.
Configuring the RLC
→
Save to Flash
181