Table of Contents
Advertisement
Using Configuration Manager
Check boxes
Fields that contain a blank box beside them are called check boxes. These check
boxes are used to enable or disable the feature associated with that field. To
enable the feature, click on the check box. A check mark displays. When you
click on the check box again, the check box clears (thereby disabling the
feature).
Option buttons
Some fields have multiple options. There is a circle beside each option that is
called an option button. For these fields, you can only select one option.
To enable an option, click on its associated option button. If you change a
previously selected option, the previously selected option button clears.
In some cases, selecting a particular option button causes the property sheet
contents to change as follows:
Some fields are dimmed (disabled) because they cannot be configured in
the context of the option you selected.
Other fields are re-enabled (no longer dimmed).
One or more values on the property sheet are replaced with values that are
specific to the option you selected.
132
RLC Installation and Administration Guide
Standard 4.0
Advertisement
Table of Contents
Troubleshooting
