June 2005
Required installation tools
This section describes the tools necessary for RLC installation.
Required tools for hardware installation
You need the following tools for hardware installation:
antistatic ESD wrist strap (recommended)
Phillips-head screwdriver
slot-head screwdriver
pen or pencil for
— noting cable lengths
— labeling cables
cable-tie wraps
cable identification labels
tape measure
Required tools for software installation or upgrade
You need the following items for software installation or upgrade:
Remote Gateway 9100 Series Product CD-ROM
PC with a CD-ROM drive or an Internet connection for obtaining software,
firmware, and documentation updates
TFTP server application installed on the PC
The TFTP server is required for performing firmware upgrades. If a TFTP
server is currently not installed, you can obtain one from the Internet.
RLC Installation and Administration Guide
Installing the RLC
79