Nortel RLC Installation And Administration Manual page 123

June 2005
2 After reviewing the message, click on the Next button.
Result: The Configuration Wizard screen displays, similar to the following:
3 Verify that the Currently Logged in Device drop down box shows RLC. If it
does not show RLC, select RLC from the drop down list.
4 Click on the Next button.
Result: The Local Unit Configuration dialog box displays. A completed
example is shown on page 98.
5 Complete the fields in this dialog box as described in the following table:
Field
Enter a node name that
identifies the unit
Enter the local IP
Address of the unit
RLC Installation and Administration Guide
Description
Enter a name to describe the RLC you are
configuring.
Enter the IP address assigned to the RLC.
Note: The system requires that you enter an IP
address. If you are using PSTN only, enter the
following: 1.2.3.4.
Installing the RLC
Ensure the
Device field
shows RLC.
97