June 2005
Reach Line Card
System expansion worksheet
Number of DSP application modules needed
Complete one worksheet for each RLC.
1 How many simultaneous faxes do you want your equipment to support?
Multiply the number of simultaneous faxes by two to determine the total number
of DSP channels required for fax calls. (Each fax call requires two DSP
channels.)
_______ x 2 = _______
Note:
If the number of DSP channels required for fax calls is not divisible by four,
round up the number entered in step 1 to the next multiple of four. (Each
DSP device contains four channels.) Always round up to a higher number.
2 Divide your Step 1 answer, the total number of DSP channels required for fax
calls, by four to determine the number of DSP devices required for fax calls.
(Configuration Manager assigns DSP function on a per-device basis.)
Step 1: _______ / 4 = _______
RLC Installation and Administration Guide
Planning forms
Page 1 of 5
___________
___________
345