June 2005
Configuration Manager description
This section describes each part of the Configuration Manager screens.
Parts of the Configuration Manager screen
The Configuration Manager is divided into three parts— a menu and two panes.
The menu across the top of the screen lists various administrative tasks you
can perform. These tasks are common to all Remote Gateway 9100 Series
units.
The pane on the left lists the property sheets you can work with. In this
guide, the left pane is called the system tree.
The pane on the right displays the screen associated with an item you
selected from the system tree. In this guide, the right pane is called the
property sheet.
Menu Bar
The Menu Bar across the top of the screen provides access to system display and
reporting options.
When you click on an option on the Menu Bar, a drop down list displays. When
you select an option from the drop down list, the screen associated with that
option displays.
Note: Options that are dimmed cannot be used for the unit you are working
with, or if you are working offline (that is, when you are not logged on to any
unit).
RLC Installation and Administration Guide
Using Configuration Manager
129