Rlc Multi-I/O Cable-Basic (Ntdr79Xx) - Nortel RLC Installation And Administration Manual

Installing the RLC
RLC Multi-I/O cable–Basic (NTDR79xx)
The RLC Multi-I/O cable–Basic provides three connections. Any number of
RLCs in any card slot can use the Basic cable.
The following table outlines the connections provided by the RLC Multi-I/O
cable–Basic.
The
connector
labeled
P1
Note: For a 32-port RLC, insert P1 into the socket for the first card slot
occupied by the RLC.
P2
Note: P2 requires a DB-15 to RJ-45 converter (shipped with the cable).
P3
Refer to page 11 for an illustration of the RLC Multi-I/O cable–Basic.
84
is a that transmits
25-pair all signals
connector
(female)
DB-15 10BaseT
connector signaling
(male)
DB-9 connector RS-232 signaling serial port to admin PC
(female)
and connects to the
I/O panel.
CLAN Ethernet
(customer LAN on the
network).
for administration and
maintenance.
RLC Installation and Administration Guide
Standard 4.0