Preparing A Tcp/Ip Network With Static Ip Addresses (No Bootp Or Dhcp Server) - Nortel BayStack 100-S Install Manual

82 Appendix A Network support
Preparing a TCP/IP network with static IP addresses
(no BootP or DHCP server)
Use this preparation procedure if your network environment is running TCP/IP
you have assigned static IP addresses for each workstation on the network.
To prepare a TCP/IP network with static IP addresses and no BootP or DHCP
server:
1
Choose an IP address for the Instant Internet unit.
Use this IP address when you configure the workstation to use Instant Internet
as the gateway and DNS proxy. For more information, refer to
workstation to use Instant Internet as the gateway and DNS proxy" on
page
2
Turn on the Instant Internet unit and run the Install program.
For details, refer to
page
3 Enter the IP address you selected for the Instant Internet unit when prompted
in the Enter Unit's IP Address dialog box.
209226-B
89.
Chapter 3, "Installing the Instant Internet software," on
29.
"Configuring a