June 2005
Configuring the RLC system information
To configure the RLC system information:
1
Complete the fields as described in "RLC System Configuration field
descriptions" on page 174.
2
Click on the OK button
Result: Configuration Manager writes the changes to a temporary file on
the administration PC.
3
Click on the Send button to update the RLC with the new information.
Notes:
a. To save changes to the RLC's Flash memory, select Upload
b. When you change System configuration parameters and Save to
RLC Installation and Administration Guide
Flash from the Menu Bar.
Flash, calls can be dropped. Ensure that there are no active calls when
you make changes to these parameters.
Configuring the RLC
→
Save to
173