June 2005
Configuring automatic upgrade
To configure automatic upgrade of your RLC, complete the following steps:
1
Access the Auto Upgrade Configuration property sheet.
2
Complete the fields as described in "Auto Upgrade Configuration field
descriptions" on page 230.
3
Click on the OK button.
Result: Configuration Manager writes the changes to a temporary file on
the administration PC.
4
Click on the Send button to update the RLC with the new information.
Note: To save changes to the RLC's Flash memory, select Upload
to Flash from the Menu Bar.
RLC Installation and Administration Guide
Configuring the RLC
→
Save
229