Nortel CallPilot User Manual page 90

90 Chapter 7 Performing hardware maintenance and mechanical assembly
10
11
12
13
201i server component diagram: exploded view
The following diagram identifies component locations on the 201i server.
Copyright © 2007, Nortel Networks
.
Install the replacement server on the switch, and then reconnect
the peripherals.
Install the MPC-8 cards removed from the defective server (see
install an MPC-8 card" (page
Boot the server to the operating system.
Run the Configuration Wizard to configure the new hardware.
For instructions, refer to the CallPilot <switch model> and CallPilot
Server Configuration guide for your switch and server.
Nortel CallPilot
201i Server Maintenance and Diagnostics
NN44200-705 01.01 Standard
5.0 23 February 2007
109)).
—End—
"To
Nortel Networks Confidential