Pep Maintenance Utility - Nortel CallPilot User Manual

To enable startup diagnostics
From the Diagnostics Tool window, select Configuration → Maintenance
Startup Diag → Enable.
To disable startup diagnostics
Nortel recommends that you leave the startup diagnostics turned on.
When you disable CallPilot startup diagnostics, you prevent CallPilot from
automatically identifying hardware problems that may exist when the system and
its services are started (DSP, TimeSwitch, MediaBus).
On the Diagnostics Tool window, select Configuration → Maintenance
Startup Diag → Disable.

PEP Maintenance utility

Introduction
The PEP Maintenance utility displays a list of all installed PEPs on the
server and enables you to uninstall PEPS.
For information on installing or uninstalling PEPs, refer to the CallPilot
Software Administration and Maintenance guide.
To access the PEP Maintenance utility
From the Windows desktop, click Start → Programs → CallPilot → System
Utilities → PEP Maintenance Utility.
Result: The DMI Viewer window appears.
Copyright © 2007, Nortel Networks
.
ATTENTION
Nortel CallPilot
201i Server Maintenance and Diagnostics
NN44200-705 01.01 Standard
5.0 23 February 2007
PEP Maintenance utility 73
Nortel Networks Confidential