Nortel CallPilot User Manual page 64

64 Chapter 5 Using CallPilot Manager to monitor hardware
To view the last diagnostics result
Step
Nortel recommends that you courtesy stop rather than stop a component if
possible. For instructions, see
1
2
3
4
5
6
Copyright © 2007, Nortel Networks
.
Action
Run CallPilot Manager and log in.
In CallPilot Manager, click Maintenance → Maintenance Admin.
Result: The Maintenance page appears.
Click the plus sign (+) beside the CallPilot server to expand the
component tree.
Continue clicking the plus sign (+) until the component with which
you want to work is visible.
Click the hardware component for which you want to run diagnostics.
Result: The Maintenance page refreshes to show details about
the component.
Scroll down to the Diagnostics section.
Result: The following figure shows the Diagnostics section for an
MPC-8 card (removable MPC.
Nortel CallPilot
201i Server Maintenance and Diagnostics
NN44200-705 01.01 Standard
5.0 23 February 2007
ATTENTION
"Starting and stopping components" (page 57).
Nortel Networks Confidential