Nortel CallPilot User Manual page 100

100 Chapter 7 Performing hardware maintenance and mechanical assembly
4 1
5 1
6 1
7 1
8 2
2
3
4
Hard drive mounted on bracket
5
Copyright © 2007, Nortel Networks
.
Small drive bracket
Tie wrap
2.5 inch hard drive adaptor
Flat flexible cable
Screws. These screws are shorter than the four screws in item 3
Place the 2.5 inch hard drive in the palm of your hand with the screw
holes facing upwards
Place the hard drive bracket over the hard drive with the data
connector facing the notched end of the bracket.
Insert the four screws, listed as kit item 3, in the mounting holes,
and tighten them
Attach the black cable adaptor to the IDE connector on the hard
drive. The power cable pins go to the left side of the connector as
you are facing it. Ensure the left-most pins are connected. Four pins
remain unconnected on the right side of the connector.
Nortel CallPilot
201i Server Maintenance and Diagnostics
NN44200-705 01.01 Standard
5.0 23 February 2007
Nortel Networks Confidential