Table of Contents
Advertisement
Product description
Figure 23, Pedestal interior (exam ple)
4.7.5.1 COIN BOX Vault
Figure 24, Vault interior.
The coin box vault is made of 4 mm sheet metal with side drilling protection.
The vault door, made of 6 mm armoured steel, has six drilling protected locking
latches along its edges.
The coin box vault door lock, placed inside a drilling protected and anti-bolster
fitting, is of a high security mechanical type such as Kaba or any of the Abloy
locks Guard-x, Exec and Protec. All of them use a key profile that can only be
obtained from the original lock manufacturer. The key does not have any serrated
surfaces neither any sharp or pointed edges. Registered locks and keys are
available.
The key can only be removed when in the locked position. It is impossible to
close the outer pedestal door until you have locked the vault door and removed
the key.
Issue 5
CWT S5 Installation & Maintenance Manual
Page 31
Advertisement
Table of Contents
Need help?
Do you have a question about the CWT S5 and is the answer not in the manual?
Questions and answers