Table of Contents
Advertisement
Safety
Fire extinguishers must be accessible and clearly marked. You must not smoke,
weld, cut, or use an open flame in the charging area. The charger must be OFF
both when you connect and when you disconnect the battery.
Follow all applicable local worker safety regulations.
3.2.5
Disposal
Lead acid batteries should be disposed of according to the manufacturer's
instructions.
Old batteries must be discharged according your countries policies and laws.
3.3
Display
Warning:
The liquid inside the LCD display is a hazardous substance.
If the display panel is damaged and the liquid crystal substance leaks out, be
sure not to get any in your mouth. If the substance comes into contact with your
skin or clothes thoroughly and promptly wash it off using soap and water.
See
Display Module replacement
unit.
3.4
Heavy lifting
Warning:
When lifting equipment that weighs more than 20 kg, always use a hoist, or let
two or more people lift it. There is a major risk of back injury or sprain.
The weight of the terminal depends on the configuration.
Follow all applicable local worker safety regulations.
3.5
Risk of tipping
Warning:
Before the terminal is fixed with screws to the floor or ground, there is a risk that
it may tip, especially if you open the doors.
The top cabinet can tip forward if it is not fixed to the pedestal.
3.6
ESD protection
3.6.1
What is ESD?
Issue 5
for a description how to replace the display
72
ESD is an abbreviation for Electrostatic Discharge.
Electrical charges are built up when materials are rubbed or
separated – e.g. when you walk across a carpet or get out of
your car. The charge, which may be several thousand volts,
can then be transferred to other objects if they get close
enough.
CWT S5 Installation & Maintenance Manual
Page 11
Advertisement
Table of Contents
Need help?
Do you have a question about the CWT S5 and is the answer not in the manual?
Questions and answers