Table of Contents
Advertisement
Seat belt war arning function f
Seat belt w
ning function for t
or the dr
he driv iver and fr
passenger er
passeng
The ü seat belt warning lamp in the driver's
display is a reminder that all vehicle occupants
must wear their seat belts correctly.
In addition, a warning tone may sound.
As soon as the driver and front passenger fasten
their seat belts, the seat belt warning goes out.
%
If you are using an ISOFIX or i‑Size child
restraint system on the front passenger seat,
where the child is not secured using the seat
belt of the front passenger seat, the seat belt
warning may be activated in rare cases. In
this case, insert the seat belt tongue into the
seat belt buckle of the front passenger seat.
Guide the seat belt between the ISOFIX or
i‑Size child restraint system and the backrest
of the front passenger seat.
F F unction of t
unction of the r
he rear seat belt st
ear seat belt status display
The rear seat belt status display is only available
for certain countries.
er and front
ont
When the vehicle is switched on, the rear seat
belt status display informs you for a certain
amount of time which rear seat belt is not fas-
tened.
The status of the rear seat belt can be recognised
by the colour of the symbol in the driver's display:
Grey: the seat belt tongue of a rear seat belt is
R
not engaged in the seat belt buckle of the cor-
responding seat.
Green: the seat belt tongue of a rear seat belt
R
atus display
is engaged in the seat belt buckle of the corre-
sponding seat.
Occupant safety
Every vehicle occupant must always fasten
their seat belt correctly before starting a jour-
ney.
Red: a vehicle occupant in the rear passenger
R
compartment has released the seat belt
buckle using the release button and may not
be properly secured.
If a vehicle occupant unfastens a seat belt in the
rear, the rear seat belt status display appears
again.
In addition, a warning tone may sound.
49 49
Advertisement
Table of Contents
