Table of Contents
Advertisement
120 Seats and stowing
120
Move the adjustment lever of the steer-
#
ing wheel.
The adjustment process will be stopped.
If there is a risk of becoming trapped by the
driver's seat:
Press the seat adjustment switch.
#
The adjustment process will be stopped.
Never leave children unattended in the
#
vehicle.
When leaving the vehicle, always take the
#
key with you and lock the vehicle.
You can stop the adjustment process by pressing
one of the memory function position switches.
& W W ARNING
ARNING Risk of becoming trapped if
children activate the easy entry and exit
feature‑
Children could become trapped if they acti-
vate the easy entry‑ and exit feature, particu-
larly when unattended.
Never leave children unattended in the
#
vehicle.
When leaving the vehicle, always take the
#
key with you and lock the vehicle.
In order to use the easy entry and exit feature, the
automatic seat adjustment function must have
been switched on (
page 113).
/
When the easy entry and exit feature is active, the
steering wheel and driver's seat will move as fol-
lows:
The steering wheel will move upwards.
R
The driver's seat will move forward or back-
R
ward to a seat position suitable for getting out
of the vehicle.
This will occur in the following situations:
You switch o the vehicle when the driver's
R
door is open.
You open the driver's door when the vehicle is
R
switched o .
%
The steering wheel will then move upwards
only if it is not already as high as it will go.
The driver's seat will then move backwards
only if it is not already at the rear of the seat
adjustment range.
The steering wheel and the driver's seat will move
back to the last drive position in the following
cases:
You switch the power supply or the vehicle on
R
when the driver's door is closed
You close the driver's door when the vehicle is
R
switched on.
The last drive position will be saved when:
You switch o the vehicle.
R
You call up the seat settings via the memory
R
function.
You save the seat settings via the memory
R
function.
If you press one of the memory function position
switches, the adjustment process will be stopped.
Advertisement
Table of Contents
