Table of Contents
Advertisement
Pull on loop
1
and fold the seat backrest
#
forward as far as it will go.
The seat will automatically move to the fore-
most position.
F F olding back
olding back
Ensure that there are no objects behind the
#
seat backrest. Otherwise, the seat backrest
may not be able to engage.
Swing back the seat backrest.
#
Ensure that the seat backrest is engaged.
#
If the seat backrest is not engaged, this will be
shown on the multifunction display on the
instrument cluster. A warning tone will also
sound.
The seat will automatically move to the stored
position.
Switching t
Switc
hing the seat heating
he seat heating on/o
on/o
& W W ARNING
ARNING Risk of burns due to repeatedly
switching on the seat heating
Repeatedly switching on the seat heating can
cause the seat cushion and seat backrest pad-
ding to become very hot.
In particular, the health of persons with limited
temperature sensitivity or a limited ability to
react to high temperatures may be a ected or
they may even su er burn-like injuries.
Do not repeatedly switch on the seat
#
heating.
Seats and stowing 115
To protect against overheating, the seat heating
may be temporarily deactivated a er it has been
switched on repeatedly.
* N N O O TE TE Damage to the seats caused by
objects or documents when the seat
heater is switched on
When the seat heater is switched on, over-
heating may occur due to objects or docu-
ments placed on the seats e.g. seat cushions
or child seats. This could cause damage to the
seat surface.
Make sure that no objects or documents
#
are on the seats when the seat heater is
switched on.
R R eq equir uirements:
ements:
The power supply is switched on.
R
115
Advertisement
Table of Contents
