Table of Contents
Advertisement
Position of jack support points
& W W ARNING
ARNING Risk of injury from incorrect
positioning of the jack
If you do not position the jack correctly at the
appropriate jacking point of the vehicle, the
jack could tip with the vehicle raised.
Only position the jack at the appropriate
#
jacking point of the vehicle. The base of
the jack must be positioned vertically
under the jacking point of the vehicle.
* N N O O TE TE Vehicle damage from the jack
If you do not position the jack correctly at the
appropriate jack support point of the vehicle,
the jack could tip over with the vehicle raised.
The jack is designed exclusively for jack-
#
ing up the vehicle at the jack support
points.
Take the ratchet out of the tyre-change tool kit
#
and place it on the hexagon nut of the jack so
that the letters "AUF" are visible.
Wheels and tyres 355
Position support
2
of jack
#
port point 1.
Turn ratchet
3
clockwise until support
#
sits completely on jack support point
the base of the jack lies evenly on the ground.
Turn ratchet
3
until the tyre is raised a maxi-
#
mum of 3 cm from the ground.
Loosen and remove the wheel (
#
355
4
on jack sup-
2
1
and
page 356).
/
Advertisement
Table of Contents
