Table of Contents
Advertisement
Inf Infor ormation on t
mation on the AMG cer
he AMG ceramic high-perf
amic high-perfor orm- m-
ance composit
ance com
posite br
e brak ake syst
e system
em
The brake system is designed for heavy loads.
This may lead to noise when braking. This e ect
can also occur a er washing the vehicle.
The noise depends on the following factors:
speed
R
brake force
R
environmental conditions, e.g. temperature
R
and air humidity
%
Have the brake system checked at a quali ed
specialist workshop a er it has been subjec-
ted to extreme loads.
ECO st
EC
O star art/st
t/stop function
op function
ECO st
EC
O star art/st
t/stop function
op function
%
Depending on the engine, the ECO start/stop
function is not available in all drive programs.
Observe the status display in the driver's dis-
play for this.
The engine is switched o automatically in the fol-
lowing situations if all vehicle conditions for an
automatic engine stop are met:
You brake the vehicle to a standstill in trans-
R
mission position h or i.
V V ehicles wit
ehicles with a 48 V on-boar
h a 48 V on-board electr
R
t t em:
em: You depress the brake pedal when travel-
ling at a low speed.
If the system has detected one of the following
situations, the engine will not stop:
You stop at a stop sign and there is no vehicle
R
in front of you.
The vehicle that stopped in front of you starts
R
up again.
You manoeuvre, turn the steering wheel
R
sharply or engage reverse gear.
%
If the system detects an intelligent stop inhibi-
tor, for example, a stop sign, the engine will
not stop.
If you activate the HOLD function or engage
the park position j, the engine can be
switched o in spite of an intelligent stop
inhibitor.
The engine restarts automatically in the following
cases:
You engage transmission position h or k.
R
You depress the accelerator pedal.
R
You open or close the so top.
R
d electrical sy
ical sys- s-
The vehicle requires an automatic engine
R
start.
You release the brake pedal.
R
V V ehicles wit
ehicles with a 48 V on-boar
R
t t em:
em:
You release the brake pedal on a downhill
-
gradient and the vehicle does not roll.
The vehicle rolls on a downhill gradient and
-
does not automatically enter glide mode at
20 km/h.
Displaying the ECO start/stop function in the
driver's display:
The symbol è (green) appears when the
R
vehicle is at a standstill: The engine was
switched o by the ECO start/stop function.
Driving and parking 165
h a 48 V on-board electr
d electrical sy
ical sys- s-
165
Advertisement
Table of Contents
