Table of Contents
Advertisement
Align brackets
2
of folding draught stop
#
with the two rear xtures
3
1
Perform the following steps in sequence on both
sides of the vehicle:
on the vehicle.
* N N O O TE TE Damage to the side trim
If the following step is not performed, the side
trim may be damaged.
Opening and closing
Before inserting the folding draught stop
#
into the side xture, pull the handle in
the direction of the arrow.
Pull handle
6
in the direction of the arrow
#
until red marking
5
is no longer visible.
Align folding draught stop
1
#
4
on the vehicle from above and insert.
99 99
with side xture
Advertisement
Table of Contents
